Okidata Microline 320 Turbo TOF Adj

THESE INSTRUCTIONS WILL PERMANENTLY ALTER THE TOP OF FORM SETTING

1) Load In A Form or Paper into the Printer
2) Press the SEL Button To Turn off the SEL Light (Deselect)
3) Press the SHIFT Button keeping it pressed
4) While the SHIFT is pressed

A) Press the FF/LOAD Button to move the paper up, or B) Press the LF Button to move the paper down 5) Release the SHIFT Button
6) Press the SEL Button To Turn on the SEL Light (Select)

This moves the paper in 0.007 increments. The lower red line on the paper shield shows the baseline of the current printing position to help you place the top of form.

When the top of form is set where you want it, the position is recorded permanently in the printers memory even when the printer is turned off until you reset it.

Okidata Microline Reset Factory Settings

THESE INSTRUCTIONS WILL RESET PRINTER SETTINGS TO THE FACTORY DEFAULTS

1) Turn The Printer Off, Then
2) Hold Down The SEL and SHIFT buttons while you turn the printer on
3) All Settings Will Now Be Reset To The Original Factory Settings Including TOF Alignment

Home
Printer Menus
Okidata 320 Turbo On Line Manual